Vicks V3100 Operations Instructions download pdf (Page 4)

6 7

Care and Cleaning

CAUTION: ALWAYS TURN OFF THE POWER SWITCH AND DISCONNECT THE POWER

CORD FROM THE ELECTRICAL OUTLET BEFORE CLEANING.

Humidifiers provide comfort by adding moisture to dry indoor air. For maximized benefit from

your Vicks Cool Mist Humidifier, follow instructions carefully. Please note that this is an

electric appliance and requires careful attention when in use.

Tap water may contain pollutants and minerals (scale) that can deposit on the inner surfaces of

the Humidifier and clog the Wicking Filter. Such scale can accelerate the growth of

microorganisms and can impair the performance of the Wicking Filter.

Daily Maintenance

1. Turn switch to OFF position and unplug the cord from wall outlet.

2. Lift the Water Tank from Base. Carefully remove the Water Tray from the base being

careful not to damage the delicate Wicking Filter. Empty excess water from the Water Tray

without removing the Wicking Filter. Remove the Tank Cap and drain any water from the

Water Tank. Rinse the Water Tank with lukewarm water after each use. Wipe accessible

surfaces of the Water Tank and Water Tray clean with a soft, damp cloth.

3. Do not immerse the Base in water. For storage, wipe dry with a soft, clean cloth. Keep

water away from the Air Outlet.

4. Do not leave water in the Water Tank or Water Tray when unit is not in use as it may

result in the build up of mineral deposits and bacteria that can inhibit the output efficiency

of the humidifier. Please note that if water remains in the Water Tank for more than a day

or two, bacterial growth is possible.

5. Replace Water Tray with Wicking Filter. Then replace the Tank. Humidifier is now ready for

use.

Weekly Maintenance

Removing Scale

1. Remove the Water Tank and empty any remaining water from the Water Tank.

2. Turn switch to the ON position, either low or high speed, and operate Humidifier until the

Wicking Filter is thoroughly dry.

3. Turn switch to the OFF position and unplug the cord from wall outlet.

4. Remove Wicking Filter from the Water Tray by carefully lifting straight up taking care not to

tear filter.

5. Remove the Water Tray from the Base. Fill Water Tray with undiluted white vinegar. Let

stand for 20 minutes.

6. Dampen soft, clean cloth or sponge with undiluted white vinegar and wipe out Water Tray

to remove scale. Do not use soap, detergents or abrasive cleaners.

7. Rinse the Water Tray thoroughly in clean warm water or put in top shelf of dishwasher to

remove scale and vinegar before disinfecting the Water Tray.

Disinfecting the Water Tray and Tank

1. Fill tank with 1 teaspoon of household bleach in 1 gallon of water. Let stand twenty (20)

minutes, shaking vigorously every few minutes, drain and rinse with clean water until the

bleach smell is gone. Dry with a clean cloth or paper towel.

2. Wipe the Water Tray with a soft cloth dampened in the bleach and water solution. Rinse

the Water Tray thoroughly or place in dishwasher before proceeding.

3. Wipe all exterior surfaces of the Base with a soft, dry cloth. Do not immerse the Base in

water or use water to clean the base. An electric shock may result or the humidifier may

be damaged.

CAUTION: Do not wash the Wicking Filter since this could damage the wick.

End of Season Maintenance

1. Follow above weekly cleaning procedure at the end of the humidification season, or when

the humidifier will not be used for several days, being sure to dry all parts. Allow the Water

Tank to air dry before storing. Do not store with water inside.

2. Leave Tank Cap partially loosened during storage to prevent Tank Cap and Gasket from

sticking together. This will prolong the life of the gasket.

3. At the end of season, remove and throw away the Wicking Filter. Never leave a used filter

in the humidifier during storage.

4. Store in a cool dry location.

5. Order your new Kaz Replacement WF2 Wicking Filter now, so that it will be available for

use next season.

Wicking Filter Maintenance

Wicking Filter performance will diminish depending on the mineral content of the water and the

amount of airborne dust in the environment.

IMPORTANT: CHECK WICKING FILTER REGULARLY. Any of the following conditions indicate

that it is time to replace the Wicking Filter.

• A buildup of impurities and minerals on the Wicking Filter (evidenced by discoloration of

the Wicking Filter)

• An appreciable decrease in Humidiﬁer output — the humidifier will run for increasingly

longer periods between fillings

• The top of the Wicking Filter is not moist to the touch

• The Wicking Filter has large holes or tears

The Wicking Filter should be replaced at least one or two times during the season, depending

on usage, mineral content of the water and the environment. We encourage you to only use a

Kaz Model WF2 Replacement Wicking Filter. The use of other Wicking Filters may lead to

substandard performance.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Vicks V3100 Operations Instructions Page 4

Comments to this Manuals

Related products and manuals for Humidifiers Vicks V3100